The small blade width of a 42-inch ceiling fan makes it easy to integrate into any room. It’s available in both traditional and contemporary designs. There are 42-inch fans available with lights, such the ones from The Modern Fan Company. Other options include 42-inch fans from Emerson Fans with wood-grain blades.
Blade Span
The fan’s blade span or width is an important factor to consider when choosing a ceiling fan. The most common spans are 42 and 52 inches. Blades with longer spans provide a gentler airflow, while those with shorter blades deliver a more direct airflow. The fan’s volume does not depend on the blade span. A smaller fan with a smaller blade span will move more air.
Ceiling fans with a 42 inch blade span are ideal for smaller rooms. These fans feature WhisperWind motor technology to provide ultra-powerful performance in quiet settings. They come in many finishes and can be paired with LED bulbs to add ambiance to the room. To ensure that your ceiling fan will fit in your space, measure the space and take measurements.
Ceiling fans should have an airflow rating greater than 3.5 CFM. This measurement is easier to measure than the actual blade span of a ceiling fans. The chart below illustrates CFM ratings and the corresponding airflow. For example, a 42-inch fan would not be large enough for a 12×12 room with a 14-ft ceiling. However, a 46 or 48-inch fan will provide enough airflow.
It is important to ensure that the blade span is sufficient for rooms with high ceilings. In general, you should leave at least two feet between the tip of a 42-inch fan and the closest wall. A fan with a shorter blade span is better for smaller rooms with lower ceilings.
CFM Rating
Before you buy a ceiling fan, measure the space where it will be installed. A fan with a CFM rating between 2,000 and 4,000 is required if the fan will be installed in a 12×12 room with 14-foot ceilings. When choosing a size fan, it is essential to consider the distance between the ceiling and fan.
Bathroom vent fans are generally rated in cubic feet of air per minute and are designed to move the air from one area to another. Standard size for a bathroom is one CFM per square foot. You can calculate the square footage of your bathroom by multiplying the length by the width. For example, a bathroom that measures six feet long by nine feet wide is 54 square feet.
A Hunter 42-inch hugger ceiling fan is a good choice for smaller rooms. This fan has a flush mount design, a pull chain, and three finishes to choose from. It also has reversible blades. In addition, it has over 2,500 five-star reviews on Amazon.
The CFM rating is another factor to consider when purchasing a 42-inch fan. A fan with a higher CFM rating can move more air and produce greater cooling. The fan’s efficiency will increase if the CFM rating is higher. A fan should have a CFM rating of 75 cfm/w.
Area Square Footage
Choosing a fan with the proper span for the room is essential for cooling. The right span is between 36 and 42 inches for rooms between 100 and 200 square feet and between 50 and 54 inches for larger rooms. To measure the square footage of a room, measure along the long axis (excluding the attic) to determine the proper fan size.
When choosing a 42-inch fan, the first thing to do is measure the room’s square footage. You can use a tape measure, a pen, paper, or your smartphone to measure the space. Once you have the measurements, you will need to multiply them. You can also use a sizing chart from the American Lighting Association to get the correct fan size for your room.
The ceiling height is another important consideration. The ALA recommends using fans between 36 inches and 42 inches for smaller rooms, while 50 to 54 inches for larger rooms. Make sure that your ceiling height is between seven and eight feet. Ceiling fans often come with adjustable down-rods, which will help you hang the fan higher or lower depending on the room’s ceiling height.
