Ceiling Fans Buy

Choosing a Ceiling Fan For Your Bedroom




Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

If your bedroom is between 144 and 255 square feet, you can get away with a standard ceiling fan of about 48 inches. But if you want to get something a little fan larger, you can go for a Downrod or Low-profile fan, as these models tend to have a greater depth.

48″ to 56″ Ceiling Fans For Your Bedroom

Choosing a ceiling fan can be a difficult task. The best size depends on several factors, including room size, style, and preference. Use the Ceiling Fan Size Guide to make your selection easier. For best performance, leave at least 50cm of space between the ceiling fan’s blade tip and the wall. Also, ensure your furniture is not too high, as it will inhibit the fan’s performance.

Honeywell 51036 Kaliza Modern Ceiling Fan with Remote Control, 56", Espresso

Make sure the fan is at least seven feet high and has sufficient clearance above the floor. The height of the fan is important for optimum air circulation. For this reason, you may want to consider fans with downrods. However, the more room there is between the ceiling and the blades, the better the air circulation. In addition, if your ceiling is low, you might want to opt for a flush-mount fan, which will hug the ceiling.

Another important point to consider is the number of blades on the fan. Typically, ceiling fans with four or more blades will give the best performance. However, a fan with fewer blades will not be as stylish as a large one.

ALA Recommends 29- to 36-Inch Fan for Room up To 75 Square Feet

If you’re considering installing a ceiling fan in your room, it’s best to measure the dimensions of the room first. Using a measuring tape and a pen or paper, measure the width and length of the room. Then multiply those measurements by four to get the square footage. Once you have the square footage, you can choose the correct sized fan. The American Lighting Association recommends a 29 to 36-inch fan for rooms up to 75 square feet. For rooms larger than that, you may want to go with a 48 to 52-inch fan.

A ceiling fan is a great energy-efficient addition to any room. But to get the most out of your new fan, you must select the right size. The fan can’t move enough air if it’s too small or too big. A fan that’s too small will not do much to circulate the air in a room, while a fan that’s too large may throw off the design of the room, making the ceiling look lower and the space smaller.

Low-Profile Ceiling Fans Are Better than Standard Ceiling Fans

When choosing a ceiling fan for your bedroom, make sure to look for a low-profile version. These are installed closer to the ceiling, and their blades are designed to have a slight curve. This type of fan is the perfect option for bedrooms with low ceilings.

Ceiling Fan with Lights Dimmable LED Reversible Blades Timing with Remote Control, 5 Invisible Blades Semi Flush Mount Low Profile Fan (21.5in, Brown)
Low-Profile Ceiling Fan

While choosing a fan for your bedroom, you also need to consider its size. Low-profile fans are generally much smaller than standard ones, so they should not overwhelm your room. The Odyn fan by Hunter is a great choice for small bedrooms, since it’s only 42″ in diameter, yet it has a high-quality design. It also has a pull-chain for easy installation, and is available in three finishes. It is also available in three speeds, and the blades are reversible.

Low-profile ceiling fans also come in hugger and flush-mount styles. These models are ideal for rooms with low ceilings and are available in the same finishes as standard ceiling fans.

Downrod ceiling fans have a greater depth

Downrods allow the fan blades to reach a greater depth and are ideal for rooms with high ceilings. These downrods, which can be 3 inches to 72 inches long, allow for more airflow and a better spiral action. Downrods are not universal and may not be interchangeable across different brands. Make sure the downrod is made for the particular model of ceiling fan you are purchasing.

Choosing the right downrod height is important for your bedroom ceiling. If your ceiling is eight feet high, you will want a downrod that is half the height. This will allow for an even airflow and heat, and still allow the fan to be placed at a lower height for aesthetics.

A downrod is a connecting piece between the fan motor housing and mounting hardware. It keeps the fan above the floor, providing optimal air circulation. Most fan housings are between eight and 12 inches high. The downrod length should match the fan’s height. To find the correct downrod length, use the chart below.

About the author

Latest posts

  • How to Bypass Pull Chain on Ceiling Fan

    How to Bypass Pull Chain on Ceiling Fan

    There are a couple of ways to fix a ceiling fan that’s jammed, but the most straightforward way is to replace the switch. First, turn off the circuit breaker’s power, then remove the outer housing and go to your local home improvement shop to buy a new switch. It is a good idea to take […]

    Read more

  • Choosing a Ceiling Fan

    Choosing a Ceiling Fan

    When choosing a ceiling fan, you may want to consider the number of blades, the motor, and the style. By following these guidelines, you can find the perfect ceiling fan for your home. Remember that these fans are not meant to be on all the time, so you want to be sure they only run […]

    Read more

  • Choosing a Ceiling Fan For Your Greenhouse

    Choosing a Ceiling Fan For Your Greenhouse

    When choosing a ceiling fan for your greenhouse, choose a high quality one that is sturdy. Cheap ones are often made of inferior materials and have weak airflow. Invest in a heavier one made of stronger and more durable materials, such as galvanized steel. These fans have thick blades and are quite efficient. J&D fans […]

    Read more